IF HEATER/FAN FAILS TO OPERATE:
- Check to make sure heater is plugged in securely.
- If it is not, remove the plug from the outlet, wait 10 seconds and plug it in securely.
- Check for a blown circuit fuse or a tripped main circuit breaker.
- If these seem to be operating properly, test the outlet with another appliance.
- Check if electricity to the main power switch in the back of the unit appears to be working.
- Make sure the heater is in the upright position.
- Unit reached set temperature
- Turn thermostat up.
- Internal Thermal Protection is active
- The heater is equipped with an overheat safety feature. When the heater’s internal components reach a certain temperature that could cause overheating, the unit will automatically shut off. The heater can be reset by unplugging it from the wall outlet. After it has cooled down [approximately 30 minutes], plug the unit back in and turn it back on.
- In certain cases the over heating could cause possible fire, the heater will automatically shut off. If this should occur, please contact our customer satisfaction center at 844-299-0879.
Comments
0 comments
Please sign in to leave a comment.